July 11th, 2012, 04:43 AM
Trouble with my Boxee Box
I'm having a Boxee Box running the latest firmware (as per 2012-07-11 - i cannot remember the version...)
But, after updating, it's begun to have some problems.
1) Sometimes a movie (specifically .iso and .avi) is freezing during playback. It most certainly happen about 1 hour after starting the movie.
2) Another issue i have, since updating to the latest firmware, is, that i cannot connect seperate speakers. The only sound output that works, is with my HDMI to Television. If i eventually connect seperate speakers to the phono outlets in the Boxee Box, it will play the introsound perfect, but afterwards state, that it could not find any audiosource - and then, ofcause, the sound doesn't work.
Is there any know fixes for the above two issues?
If you need any additional information, let me know.
July 11th, 2012, 09:00 AM
#1 - do a factory reset and update again.
#2 - change your audio output settings in Boxee's prefs to "ALL" or to "Analog"
July 11th, 2012, 03:07 PM
July 12th, 2012, 03:27 AM
What issues persists ? Freezing or the sound?
Where are your files located?
July 12th, 2012, 03:58 AM
Both of the metioned issues. (Freezing and sound).
Originally Posted by marcel
The files har located on an external drive, connected to the Boxee's USB outlet.
July 12th, 2012, 06:14 PM
Both boxees connect to the same external drive via usb?
July 13th, 2012, 06:25 AM
No. They have a 2TB WD Elements drive connected, each. :-)
Originally Posted by krazyjakee
July 13th, 2012, 09:11 AM
It could be that you WD Elements drive is spinning down at the one hour point to save energy. Have you tried to check the spin down settings of the drive(s) with the WD "Spindown or Stop" utility? I'm not sure that this link is for your harddrive edition, but it at least gives you a starting point => http://support.wdc.com/product/downl...id=301&lang=en
Are you connecting the speakers directly to the two RCA stereo jacks on the back of the Boxee Box? Wouldn't you need to connect an amplifier to those jacks in order to get sound out of these?
July 13th, 2012, 09:15 AM
I'm trying the suggested program, to check. But since its not on every single movie/media it stops, i'm having a hard time thinking, that it's the drives. But i'll check :-)
Originally Posted by pjk
Yes, i'm connecting the speakers directly to the two RCA jacks on the back of the box. They have build-in amplifier, and worked fine, until i've upgraded to the lastest software release.
Since then, i've tried to make an factory reset, but the problem persists, even though it's running the oldest firmware. (Currently, i've upgraded to the latest yet again)