July 1st, 2012, 02:06 PM
Boxee Remote scrolling Issue, 1 Click & the selection moves multiple times!!!!
I recently introduced a 2nd boxee box into my home and upon hooking it up I noticed that when you click a button once on the remote, the selection on the screen will move many times instead of just once. It's like the signal is getting jammed and stuck, causing the selection on the screen to jump all around uncontrollably. I assumed it was the remote but am still not quite certain. I brought the remote from this seemingly defective unit into my bedroom where my first boxee was. This boxee has always worked perfectly with the remote but since using the remote from the defective unit on it it now stutters and jumps around too, using wither remote. It's almost like the remote from the new box has damaged the unit! So now, both my Boxee's are very difficult to navigate with either remote. I have now ordered a 3rd boxee box because I love the way they work but this remote control issue is starting to piss me off. I have a fair bit invested into the Boxee so I'm hoping to get this remote control issue resolved.
Any help would be appreciated. Thanks.
July 1st, 2012, 02:58 PM
1. READ the sticky post at the top of this forum. It's called "SERIOUSLY! READ THIS FIRST: Top Ten Boxee Topics" for a reason.
2. PAIR your remotes. It's the very first subject in the thread mentioned above.
Boxee uses RF remotes and from the factory any remote will control any Boxee Box. So obviously when you have two (or more) of them you're going to run into odd behavior until you set each box to respond to one remote.
Last edited by twistybox; July 1st, 2012 at 03:00 PM.
July 1st, 2012, 05:42 PM