Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: XBMC on Boxee Box

  1. #1
    Join Date
    Jan 2012
    Posts
    15

    Default XBMC on Boxee Box

    Please release the info to get XBMX on boxee box......

  2. #2
    Join Date
    Apr 2011
    Location
    Germany
    Posts
    13

    Default

    This is not possible...

    Thats not the idea of boxee...
    German Boxee Support Forum: www.boxee-forum.de

  3. #3
    Join Date
    Nov 2010
    Posts
    346

    Default

    That and ....
    * XBMC team have zero interest in Boxee Box.
    * Even if you could get XBMC running on it would likely fair no better than Boxee, some of the significant underlying problems are caused by Intels supplied OS.
    * The chipset is no longer supported by Intel.
    * The only way for XBMC to improve the Boxee Box would be if the accompanying software/drivers were all fully open source with documentation which is not gonna happen as proprietary parts like PowerVR GPU are present in the chipset.

    If you want an XBMC box you don't have long to wait Sigma Designs have announced their XBMC hybrids are releasing in July and XBMC itself has been ported to Amlogic 8726 chipsets of which their are a ton of on the market (any Cortex A9 Android TV box is usually an AML8726) and then there is the All Winner A10 (more Android TV boxes) which is also getting an XBMC port.

  4. #4
    Join Date
    Nov 2010
    Posts
    29

    Default

    And don't forget about raspberry pi.

  5. #5
    Join Date
    Dec 2010
    Posts
    28

    Default

    Quote Originally Posted by ettore View Post
    And don't forget about raspberry pi.
    Don't get too caught up in the RPi "hype". It may run XBMC, but the supported video on the hardware on the device is very limited. If it is h264 video @ 1080p 60hz, then you are good. Play a 720p or even a 480p DIVX avi and it all goes pearshaped! Pretty much everything else except composite PAL/NTSC and a few "computer" resolutions need to be decided via software rather than hardware. This is where it becomes clunky as it is underpowered for this sort of work. It's a toy...a very powerful education toy, but still a toy.
    __________________________________________
    Boxee Box: 1.5.1 Build 23735, H/W Ver A1
    NAS: Synology DS-1511+ (DSM 4.0 10Gb Hybrid Raid via NFS)
    Router: Netgear N600 WNDR3700v2 1.0.0.12 firmware
    Network: Gigabit Ethernet Cat6
    Modem: Cisco DPQ3212 Cable Modem
    TV: Pioneer LX-508 via HDMI
    Receiver: Pioneer VSX-D710S via Optical
    PVR: Beyonwiz DP-P1

  6. #6
    Join Date
    Apr 2009
    Location
    Orbiting Venus
    Posts
    16,166

    Default

    It may run XBMC, but the supported video on the hardware on the device is very limited.
    I've been saying as much for awhile but nobody listened to me
    Note: This is a users' community forum. For official support, submit a Support Request.
    You can also find out how to Get Help or read the Boxee TV and Boxee Box Documentation.

    SageTV Server 7.1.x w/Gemstone and Plex Home Theater v0.9.9.7.146 w/PlexPass
    HD-PVR w/v1.5.6 drivers / Hauppauge IR blaster / FiOS Extreme HD / Motorola QIP6200 / SPDIF+720p Fixed Output
    on HP Media Center 8400F (Phenom 9500 QuadCore 2.2GHz, nVidia GeForce 8500 GT)
    via Olevia 247TFHD/Onyko TX-SR606/Harmony 550/HP MediaSmart EX490 WHS w/12TB
    Plex Media Server v0.9.7.22 on HP Touchsmart 600-1105xt
    Sonos Play:3, Connect / Simple.TV / Roku 2 XS+Plex / iPhone 5 / iPad 2

    "Some people just aren't happy unless they're disappointed or angry."

  7. #7
    Join Date
    Nov 2010
    Posts
    29

    Default

    Well I just started testing it out and it is not bad, it played most of what i threw at it, which was mostly mkv at 720p and 1080p, avi and xvid at dvd res, not 720, will need to try that.
    It is still in the beta stages, so it still locks up once in awhile, but not bad for 35$.

  8. #8
    Join Date
    Dec 2010
    Posts
    28

    Default

    Quote Originally Posted by ettore View Post
    Well I just started testing it out and it is not bad, it played most of what i threw at it, which was mostly mkv at 720p and 1080p, avi and xvid at dvd res, not 720, will need to try that.
    It is still in the beta stages, so it still locks up once in awhile, but not bad for 35$.
    Seriously? You can't even begin to compare the Boxee to a XBMC Raspberry Pi. It's just so wrong, I'm not even going to go into it. Roku, WDTV, Popcorn etc...Yes, but RPi? Come on, get some perspective. What about audio for a start? Like I said, nice toy but....

    And $35? Plus power supply, Plus HDMi cable, Plus Box. Plus Remote??. Did it work straight from the box? How much work did you need to do to get XBMC on it? Is your mum or kids going to be able to use it? For all its issues, the Boxee Box is 1000% better. Really, If this is the sort of product you want for your HT needs, Intel have a more suitable board on the way.
    __________________________________________
    Boxee Box: 1.5.1 Build 23735, H/W Ver A1
    NAS: Synology DS-1511+ (DSM 4.0 10Gb Hybrid Raid via NFS)
    Router: Netgear N600 WNDR3700v2 1.0.0.12 firmware
    Network: Gigabit Ethernet Cat6
    Modem: Cisco DPQ3212 Cable Modem
    TV: Pioneer LX-508 via HDMI
    Receiver: Pioneer VSX-D710S via Optical
    PVR: Beyonwiz DP-P1

  9. #9
    Join Date
    Apr 2009
    Location
    Orbiting Venus
    Posts
    16,166

    Default

    Quote Originally Posted by ettore View Post
    which was mostly mkv at 720p and 1080p
    mkv is just the container and says little about how the file itself was encoded.

    Per gpoly's first post in this thread "...supported video on the hardware on the device is very limited. If it is h264 video @ 1080p 60hz, then you are good", so your files are more than likely h.264 encoded and so play just fine.
    Note: This is a users' community forum. For official support, submit a Support Request.
    You can also find out how to Get Help or read the Boxee TV and Boxee Box Documentation.

    SageTV Server 7.1.x w/Gemstone and Plex Home Theater v0.9.9.7.146 w/PlexPass
    HD-PVR w/v1.5.6 drivers / Hauppauge IR blaster / FiOS Extreme HD / Motorola QIP6200 / SPDIF+720p Fixed Output
    on HP Media Center 8400F (Phenom 9500 QuadCore 2.2GHz, nVidia GeForce 8500 GT)
    via Olevia 247TFHD/Onyko TX-SR606/Harmony 550/HP MediaSmart EX490 WHS w/12TB
    Plex Media Server v0.9.7.22 on HP Touchsmart 600-1105xt
    Sonos Play:3, Connect / Simple.TV / Roku 2 XS+Plex / iPhone 5 / iPad 2

    "Some people just aren't happy unless they're disappointed or angry."

  10. #10
    Join Date
    Aug 2012
    Posts
    1

    Default

    Quote Originally Posted by gpoly View Post
    Seriously? You can't even begin to compare the Boxee to a XBMC Raspberry Pi. It's just so wrong, I'm not even going to go into it. Roku, WDTV, Popcorn etc...Yes, but RPi? Come on, get some perspective. What about audio for a start? Like I said, nice toy but....

    And $35? Plus power supply, Plus HDMi cable, Plus Box. Plus Remote??. Did it work straight from the box? How much work did you need to do to get XBMC on it? Is your mum or kids going to be able to use it? For all its issues, the Boxee Box is 1000% better. Really, If this is the sort of product you want for your HT needs, Intel have a more suitable board on the way.
    $35 for the RPI
    $7 for the class 10 sd card
    $6 for the HDMI cable
    $3 for the micro usb cable
    $5 for the cat 5e ethernet cable
    Free=xbian image
    Free=remote (uses cec)

    So for under $60 I have a rig that plays every format I can think of except mpeg2. Plus runs transmission torrent, ftp server, jdownloader...pretty much any ARM compiled software AND plugs into the USB port on my tv and is controlled with my tv's remote through cec. Writing the image tool 140 seconds using win32image writer.

    Yes my mother can use it nicely too.

    Oh and being open source my upgrade path is more secure than boxee. I have both and now I use my boxee to stream content the rpi downloaded.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •