Boxee Box: How to factory reset

[pcm2a]

The unit will no longer scan new sources that I add. How do I reset to factory defaults?

Thanks!

[plik]

Turn it off. Then press and hold the power button for a few seconds ( 5ish works for me) and release. It should go into a Recovery Mode menu.

You'll know you did it right because the Boxee logo on the box itself will light up yellow instead of green.

[judgeschambers]

Turn off bbox.
Hold power button more than 5 but less than 6 seconds.
It will restart with grey screen and load for some time.
Eventually the logo on the box will go red.
Then a menu will pop up with options.

[Peteostro]

Is the boxee logo supposed to go red or orange.
I want to try to factory reset but I can get any menu on the screen

[marcel]

If you hold the power button down for 6-7 seconds the Boxee led should go to orange

[cblank21]

Now if I could only figure out to stop it from auto updating!

[dbstv]

Where/ or what button is power button

[darcilicious]

There's a power button on the Box itself, on the "lowest corner".

http://www.boxee.tv/htdocs/images/home/buy_box_rear_444px.png

[tuffryder]

How long is this supposed to take? I held the power button in for about 5 seconds and the BB-logo went red. Now its blinking between red and green and I only have the BB loading picture on the tv. This has been going on for about 20 minutes.. Doesn´t seem right to me.

[jasmeet_9sb]

Unplug the power cord and wait for 30-40 seconds then, plug it back and now hold the power button on top of box for 6-8 seconds and the recovery console should appear . See the link: http://support.boxee.tv/entries/20778533-boxee-box-recovery-console .